A Comparative Study on Accuracy and Reproducibility of Alginate and Addition Reaction Silicone as an Impression Materials.

Authors

  • Shakila Fatema Assistant Professor & Head, Dept. of Science of Dental Materials, Holy Family Red Crescent Medical College Hospital, Dhaka
  • Sheikh Md Shahriar Quader Assistant Professor & Head of the Unit, Sher-e-Bangla Medical College, Dental Unit, Barisal
  • Mohammad Shamsuzzaman Oral & Dental Surgeon, Z & Z Orthodontic & Dental Clinic, Uttara, Dhaka
  • Mirza Md Arifur Rahman Registrar, Dental Unit, Holy Family Red Crescent Medical College Hospital
  • Nasima Khan Assistant Professor & Head, Department of Conservative Dentistry and Endodontics, Saphena Women?s Dental College, Dhaka

DOI:

https://doi.org/10.3329/updcj.v3i2.17996

Keywords:

Impression Material, Alginate, Addition Reaction Silicone, Accuracy, Reproducibility

Abstract

Background: To achieve accuracy and exact reproduction of prosthesis, choosing a perfect impression material is essential. Especially to make the prosthesis as accurately as possible, impression material should possess some essential properties, like; minimum dimensional changes, good flow ability and easy removal.

Purpose: The aim of this study was to evaluate the accuracy and surface detail reproduction of Alginate and Addition Reaction Silicone as an impression materials.

Method: This is an experimental in vitro study. In this study Impression by Alginate and Addition Reaction Silicone were made using a round stainless steel test block with three horizontal lines and two vertical lines. The horizontal lines were used for evaluating the surface detail reproduction, and vertical lines were provided for the dimensional accuracy. For dimensional accuracy the length of the middle horizontal line in between vertical lines and the distance between the top and bottom horizontal line was measured using travelling microscope. And for surface detail reproduction three horizontal line of one segment were observed under stereomicroscope.

Result: According to study results Addition Reaction Silicone is better than Alginate regarding quality of impression.

Conclusion: In comparison to Alginate, Addition Reaction Silicone might have better performance about accuracy and surface detail reproduction.

DOI: http://dx.doi.org/10.3329/updcj.v3i2.17996

Update Dent. Coll. j: 2013; 3 (2): 28-33

Downloads

Download data is not yet available.
Abstract
1331
PDF
1587

Downloads

Published

2014-02-18

How to Cite

Fatema, S., Quader, S. M. S., Shamsuzzaman, M., Rahman, M. M. A., & Khan, N. (2014). A Comparative Study on Accuracy and Reproducibility of Alginate and Addition Reaction Silicone as an Impression Materials. Update Dental College Journal, 3(2), 28–33. https://doi.org/10.3329/updcj.v3i2.17996

Issue

Vol. 3 No. 2 (2013)

Section

Original Articles

License

licensing, and copyright: 

Articles in Update Dental College Journal are licensed under a Creative Commons Attribution 4.0 International License CC BY-4.0. This license permits 

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the following license terms.

  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.