Preparation and application of different size materials on the cotton yarn and investigating the effect of sizing on the tensile properties of cotton yarn

Authors

  • S Sultana Fibre & Polymer Research Division, BCSIR Laboratories, Dhaka
  • MZ Haque Chemical Research Division, BCSIR Laboratories, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dr. Qudrat-E-Khuda Road, Dhaka-1205
  • HP Nur Fibre & Polymer Research Division, BCSIR Laboratories, Dhaka

DOI:

https://doi.org/10.3329/bjsir.v49i1.18850

Keywords:

Cotton yarn, Tamarind kernel, Sizing, Desizing, Tensile properties

Abstract

Sizing of the cotton yarn is essential to reduce breakage of the yarn due to abrasion during weaving process. The sizing agent on the woven fabric after weaving needs to remove completely before the next textile production process of dyeing and finishing. So, water soluble sizing agent is easy to handle and easy to desizing for pre-treatment of woven fabric. In this work, different types of water soluble tamarind seed kernel based sizing formulations (assigned by A, B and C) were made and applied on cotton yarn to investigate the effect on the tensile properties of sized and unsized cotton yarns. Cotton yarn treated with size B formulation shows the better tensile properties than the application of size A and size C formulation. The effect of lubricant has also been investigated and shows that the addition of lubricant decreases the tensile properties of the cotton yarn.

DOI: http://dx.doi.org/10.3329/bjsir.v49i1.18850

Bangladesh J. Sci. Ind. Res. 49(1), 25-30, 2014

Downloads

Download data is not yet available.
Abstract
1960
PDF
1127

Downloads

Published

2014-05-08

How to Cite

Sultana, S., Haque, M., & Nur, H. (2014). Preparation and application of different size materials on the cotton yarn and investigating the effect of sizing on the tensile properties of cotton yarn. Bangladesh Journal of Scientific and Industrial Research, 49(1), 25–30. https://doi.org/10.3329/bjsir.v49i1.18850

Issue

Vol. 49 No. 1 (2014)

Section

Articles

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.